In the market, many great tools are available for finding the studs whether the metal studs, or the wood studs and they all are great in their functions. However, if we talk about the Ryobi whole stud finder then it is all in one studs detector.
|Weight: 8 ounces
Dimensions: 6.7 x 3.3 x 1.8 inches
Material: Hard Plastic
Batteries Required?: Yes
|Check On Amazon|
It is a nice tool available in the market which is of great worth. Ruby has the ability to find the metal studs and the good thing about this sensor is that it pinpoints the exact location of the metal and wood studs.
Ryobi is an affordable stud sensor where many people are using it for home DIY projects.
Table of Contents
- Exceptionally, this Whole stud detector can detect the studs with one or two-handed operation.
- There is a central button in the stud finder with the help of which you can mark the location of the studs on the drywall when you press it.
- Fortunately, the stud finder is equipped with 7 LED lights.
- When you find the exact location of the studs then and the central LED light will go on.
- Consequently, it can also evaluate the drywall thickness with auto depth scan Technology.
- 1 AAA battery is included in the Ryobi whole stud detector.
- Furthermore, it also has material detection capability with the help of which you can detect the metal (non-ferrous), AC wire, wood studs, metal studs, etc.
- Ryobi whole stud sensor has AC detection mode and auto scan mode with the help of which it can detect the wood and metal studs as well as the live AC wires.
- Manufacturer: Ryobi
- Dimensions: 8.3 x 6.4 x 1.4 inches
- Batteries: 1 AA batteries required. (included)
- Material: Hard Plastic
- Weight: 8.8 ounces
Additionally, you can easily find the stuff behind the drywall with the help of studs scan mode. It is very easy to detect the studs behind the 1/2 inch drywall.
It is a great stud finder in finding the wood and metal studs. When you start scanning process, it finds the studs by starting the calibration process.
Make sure that you are not moving it fast as it will give you an incorrect reading as well as missing the studs. At this time, you have to do the calibration again. So, move it slowly across the drywall to get the accurate results.
Generally, when you start the scanning process, the first step is the process of calibration. When you press the two bottom buttons, the LED lights start to blink and the calibration process started. After calibration, it will indicate the presence of the studs by blinking of the three Central LED lights.
Fortunately, when you open the packaging of the Ryobi stud sensor then along with the tool, you get the operators manual in it. In this manual, you get detailed information about the stud sensor as well as the whole method of usage.
You will also get many tips while detecting the wood or metal studs. There are also many safety rules for the whole stud detector in which you get any information about the battery extreme uses, temperature conditions, or damaging of the battery information, etc.
You will also get the general information about the maintenance as well as the storage of the studs sensor. It is usually recommended to store the tool in the cool dry location so that preventing it from any rust or moisture.
Ryobi stud finder app is also available with the help of which you can find the studs with more confidence and accuracy. All you have to do is to download the app on your smartphone and connecting it to the stud finder.
Now, your smartphone is converted into a smart studs finder. Generally, the smartphone-controlled calibration is used to find the studs in the drywall up to 3/4 inch deep.
It also calculates the center of the studs within 1/ 8 inch deep. Subsequently, it shows the live tracking of the locations of the studs right from your smartphone screen.
In this studs detector, 1 AAA battery is present in the unit. First of all, you must find and remove the red pull tab to activate the battery. By pressing and sliding the battery cover, it will open.
Now you can install the battery according to the plus-minus indicators. It is highly recommended not to use the tool when the battery cover is not installed as it will cause an accident.
Keep this thing in mind when you are not using it for prolonged periods then you should remove the battery for storage.
First of all, you have to put the whole studs detector on the drywall or any material where you are looking for a stud. There are seven LED lights on this studs detector.
When the central light goes on, then you find the center of the studs. When you put it on the drywall, press the two buttons on the bottom.
Consequently, at this time, it senses the density of the drywall. When you move it along the wall, the LED lights going to be light up.
When it finds the center of the studs, the Central light will go on. You can mark this point with a pencil or you can press the central button. When you press the central button, the pin comes out from it which can mark on the drywall.
When you are locating the livewire then it will indicate the stud with these lights and also the red light is on with continuous beep sound.
Q 1: Can we use the Ryobi Whole studs detector by holding it with one hand?
Ans: No, you have to use this stud finder with two hands as there are two buttons at the bottom of the studs finders which you have to press at the same time.
This is somewhat critical from a security point of view as when you are finding the studs by standing on the ladder, it is unable to use both hands for studs finding. Otherwise, it is the most accurate stud finder.
Q 2: How well the Ryobi find the studs?
Ans: This stud sensor is a whole stud sensor that can find the studs very accurate and precise. This is so great studs sensor that if you use it correctly then it will give you the correct reading and you do not need to scan it a second time.
You just have to keep this thing in mind that does not move it fastly on the drywall. Move it slowly and it will give you an indication of the studs by lightning up the LED lights.
Q 3: On which type of material you can use Ruby Whole stud finder?
Ans: This stud sensor can find the studs behind the drywall. It also works well on the textured garage wall as well as a heavily textured popcorn ceiling. Ryobi has the ability to find the metals (non-ferrous), AC wire, wood studs, etc.
Q 4: What safety measures we follow when using Ryobi Whole studs sensor?
Ans: First of all, keep this thing in mind that when there are extreme temperature conditions there is a chance of battery leakage. If you think that the liquid comes out of the battery and if contact with your skin then you should immediately wash your hands with soap and water.
Do not keep the batteries near the source of ignition such as pilot light. It will result in the explosion of the battery. It is also recommended that not to use those batteries which have been dropped or received the Sharp blow.
Q 5: On which type of material Ryobi has accuracy concerns?
Ans: Finally, it is indicated in the manual that this stud finder has some issues when you are finding the studs over the wallpaper or the wall which has a metal foil or fabric on it.
It also does not find the metal studs as well as the wood studs on the Plaster with metal mesh in it. It is clearly shown that this stud sensor works well on the drywall whereas it does not specifically rule out other materials. So the Ruby studs sensor is clearly been designed by keeping drywall in mind.
At last, we come to the conclusion that Ruby Whole stud finder is an incredible tool when you are finding the wall thickness as well as the wood and metal studs. In the meantime, it also has the ability to find live AC wires.
Ryobi Whole stud finder is the perfect one when you are more concerned about the accuracy. It is different than other studs’ sensors because it has seven LED lights that pinpoint the detection of the studs whether the wood studs or the metal studs.