The PERLESMITH stud finder is the best electric stud sensor. Just like many stud finders, this stud finder is also a lightweight stud detector so that you can do many of your DIY projects easily. The stud sensor is an amazing wall detector with a comfortable ergonomic design.
As PERLESMITH stud finder is very easy to use. You just have to simply turn on the machine and place it on the wall and start scanning.
|Weight: 8 ounces|
Dimensions: 6.7 x 3.3 x 1.8 inches
Batteries Required?: Yes
|Check On Amazon|
After scanning, you will get the indication of the stud by a beep sound or a flash. This is the time when you think that it may be a stud.
It is so light in weight stud sensor that its weight is only 8 ounces. So your hand will not get tired even when you are using this stud sensor throughout the day.
It can detect the wood studs with the help of stud scan mode and metal studs with the help of metal scan mode. Additionally, PERLESMITH stud finder also has an AC scan Mode. Now, you can easily locate the wood studs or metal studs behind the floor, ceiling, and wall.
This is the most incredible thing about PERLESMITH stud finder that it comes with a five scanning mode. Let’s discuss every mode in detail.
Stud scan 0.5 inch Deep:
It is a stud scan mode where you can find the centers and edges of the woods or metal stud up to 0.5 inches deep. If you want to get the accurate results then you should start the stud scan mode when looking for the studs.
Stud scan one inch Deep:
With the help of this mode, you can find the edges of the studs as well as the center of the studs which are one inch deep behind the floor, walls, and ceilings.
Stud Scan 1.5-inch Deep:
In the stud scan mode 1.5-inch deep, you can find the wood studs as well as metal studs which are 1.5 inches deep behind the wall, floor, and ceilings.
AC Scan Mode:
AC scan mode is for detecting the wires. So you can detect the wires with the help of wire warning detection technology of the PERLESMITH stud finder.
Moreover, with the help of AC scan mode detection, you can locate the unshielded and live electrical wiring which is up to two inches deep.
Consequently, to protect yourself from any hazard or accident, the AC virus scan is always on in all modes and it detects the presence of live unshielded electrical wires whether the stud scan mode is on or metal scan mode or AC wire scan mode is on.
Metal scan mode:
The PERLESMITH stud finder can easily find the metal studs which are up to 2.36 inches deep. Actually, the main purpose of the metal scan mode of PERLESMITH stud finder is to locate and avoid hazards such as pipes behind the wall. Moreover, with this metal scan Mode, you can locate and determine whether the stud is a wood stud or the metal stud.
The PERLESMITH stud finder is equipped with automatic calibration and it is also easy to use. When you turn on the stud finder and place it on the wall, it will automatically calibrate itself.
As we all know that the stud finders who have the property of automatic calibration will give accurate and precise results with maximum reliability. When you heard a short beep sound then it is the indication of completion of the calibration process.
Fortunately, the accurate detection of the stud can be possible with the help of PERLESMITH stud finder. You can find and locate the AC wires, pipes, metal studs, rebar, joists, behind the ceilings, walls, and floors, etc.
No fear of drilling:
At this time, there is no fear of drilling into a live AC wire as this stud finder gives you the accurate results.
DIY home projects:
However, many people are using the PERLESMITH stud finder commercially in different outdoor construction sites as well as in many office works.
But now you can do all of your home projects with the help of this amazing stud finder. Generally, you can mount a TV or install the bathroom cabinets with the help of a stud finder.
It is also a very good stud finder if you want to mount a photo frame or install the garage racks etc.
The stud finder is very easy to use where you can do a variety of tasks. First of all, you have to power on the stud sensor by holding the power button.
When it gets on, it will do the automatic calibration so that you get accurate results. Furthermore, When the calibration is completed, it will give your short beat sound and after that you have to move the stud finder in the right or left direction.
And, When it become successful in finding the stud, then it will give you a beep sound as well as bars on the LCD display.
Q 1: Can we able to detect the live wire in the wall?
Ans: Yes, fortunately with the help of PERLESMITH stud finder, you will be able to find the live wire in the wall.
This will be possible with AC scan mode, where the stud finder uses the wire warning detection Technology. When it become successful in finding the live wire, it will show the lightning on the LCD display.
Q 2: Can we use the PERLESMITH stud Finder for detecting the pipe?
Ans: In short, in this stud finder, metal scan mode is present which is very helpful in the detection of the pipes as well as prevent yourself from any hazard. If you have any problem regarding the detection of the pipes, you can and contact our team.
Q 3: How can we store the PERLESMITH stud finder if we are not using it?
Ans: For the long-lasting storage of the scanner, you must remove the battery from the battery case and put the PERLESMITH in the packaging. This will save your battery life as well as your stud finder.
Q 4: When we are finding a stud, is PERLESMITH make a sound?
Ans: Yes, when we are searching the center of the studs, the full bars are shown on The signal strength indicator. When the center of the stud is detected, it will show the stud indication with a beep sound.
Q 5: When is the time when you have to change your battery?
Ans: As we all know that there is an LCD display of PERLESMITH. It will show you a low battery indication on this LCD screen. First of all, you have to remove the battery and insert the new battery as per instructions present in the manual.
Make sure that you are conducting the battery in the right direction by connecting the positive and negative signs. The battery we used in this stud finder is a 9V battery and fortunately it is included in the packaging.
Q 6: What is the Warranty of PERLESMITH?
Ans: I am amazed by seeing its warranty as the manufacturers of this stud scanner give you a 10-year warranty. This thing is very good when the manufacturers are giving you a long warranty period. It also adds to the reliability of the product.
Lastly, whenever we are thinking of buying a stud finder, keep in mind 3 important things.
Number one is its accuracy, the second one is the price, and the third one is the capabilities.
PERLESMITH wall scanner is the fantastic stud finder that has all of these three qualities. In short, the stud finder is the most accurate as well as it is affordable and now comes with a discount.
Also, it has many capabilities including five scan modes. So if you are thinking of buying an accurate as well as the affordable stud finder, then you should go for PERLESMITH.